(865) 255-9692Open 24/7: call or text
Get a quote

Carpet and fabric protector in Knoxville, TN

Most carpet comes from the mill with protection on it, but foot traffic, vacuuming and cleaning wear it down over the years. Putting it back after a cleaning is one of the cheapest ways to make your carpet look better for longer.

Quick answer

Protector is a clear treatment we spray on right after cleaning so spills bead up instead of soaking in and dirt lets go easier at the next cleaning. It dries with the carpet, usually in about 1 to 3 hours, and it’s worth renewing after each deep cleaning.

Call or text 24/7(865) 255-9692

(865) 255-9692

CallText
Ask Walt

What does carpet protector actually do?

Protector puts an invisible shield around each fiber. It does three things:

  • Spills sit on top longer. Coffee, juice or a pet accident beads up for a little while instead of soaking straight in, which gives you time to blot it up.
  • Dirt doesn’t grab as hard. Dry soil from shoes and paws slides off a protected fiber more easily when you vacuum.
  • Cleanings work better. Soil and stains let go easier the next time we clean, so traffic lanes come back brighter.

Does carpet protector make carpet stain-proof?

No, and you should be wary of anyone who says it does. Protector buys you time and makes spots easier to get out. Red drinks, coffee, mustard, hair dye and pet urine can still stain if they sit. Blot spills right away and protector does its job; leave them overnight and it can’t.

Why apply protector right after cleaning?

Protector bonds best to clean fiber. Dirt and old residue get in the way, so the best time is right after a deep cleaning, while the carpet is still damp and the fibers are open. Cleaning, especially hot water extraction, also removes some of the protection that was there before, so a fresh coat puts back what the cleaning took off. See carpet cleaning.

Is carpet protector worth it?

It’s worth the most in the places that take the hardest use:

  • Traffic lanes, hallways and stairs.
  • Homes with kids and pets.
  • Light-colored carpet and fabric.
  • Dining room rugs and chairs, and family room sofas.
  • Rentals, where carpet has to last through more than one tenant.

In a guest room that rarely gets walked on, you can skip it.

Does carpet protector help with pets?

It helps, within limits. Muddy paw prints and tracked-in dirt release more easily from protected fiber, so they vacuum and spot out better. A fresh pet accident also sits on the surface a little longer, which gives you time to blot most of it up before it reaches the pad. What protector can’t do is stop urine that sits for hours. Once urine gets into the backing and pad, it needs a real treatment, not a spot clean. See pet urine and odor removal.

Where should protector go on stairs and in traffic lanes?

Stairs take more wear per square foot than any other carpet in the house, because every step lands on the same spot and the edge of each tread gets scuffed by toes and heels. The same goes for the path from the door to the kitchen and the spot in front of the couch. Those are the areas that turn gray first and the areas where protector earns its keep. If you want to keep the cost down, protect the stairs, halls and traffic lanes and skip the corners of bedrooms where nobody walks.

Can you put protector on wool carpet and rugs?

Yes, with care. Wool reacts to strong chemicals and high heat, so wool gets wool-safe cleaning and a protector suited to wool. We use WoolSafe-approved products on wool. For rugs, see area rug cleaning.

Can furniture and drapes get protector too?

Yes. Fabric protector on sofas, dining chairs and cushions is one of the best uses of it, since food and drinks end up there more than anywhere. We check the fabric and care tag first, the same as we do before we clean it. See upholstery cleaning and drapery cleaning.

How long does carpet protector last?

It wears off a little with every footstep and every cleaning. In busy homes, traffic lanes lose most of it within a year or two, while the edges of the room keep it much longer. The simple rule: renew it each time the carpet is deep cleaned.

How we apply protector

  1. 1

    Clean first

    We deep clean the carpet or fabric so the protector bonds to clean fiber.

  2. 2

    Check the fiber

    We match the protector to the fiber, with wool-safe products on wool.

  3. 3

    Apply evenly

    We spray an even coat while the fibers are still damp and open.

  4. 4

    Groom

    We work it into the fibers so it coats each one, not just the tips.

  5. 5

    Dry

    It dries with the carpet, usually in about 1 to 3 hours.

Common questions

Is carpet protector safe for kids and pets?

Yes, once it’s dry. Keep kids and pets off the carpet until it’s dry, the same as after any cleaning.

Will protector change how my carpet feels or looks?

No. It dries clear and doesn’t change the color or the feel.

Can I put store-bought protector on myself?

You can, but cans tend to go on unevenly and only coat the tips. A professional coat right after cleaning goes on evenly and gets worked into the fibers.

Does new carpet need protector?

Most new carpet comes with factory protection, so it doesn’t need more right away. Add it after the first deep cleaning.

Do you add protector to every cleaning?

Only if you want it. We’ll recommend it for traffic lanes, stairs and furniture and quote it before we start.

How soon can I walk on the carpet after protector goes on?

As soon as it’s dry, usually about 1 to 3 hours after a steam cleaning. Walk on it in socks or clean shoes until then.

Does protector help with spills on rugs?

Yes. Rugs in dining rooms and entries get the most spills and the most dirt, so they’re a great place for it. Wool rugs get a protector suited to wool.

How much does protector cost?

We quote it on site with your cleaning, by the area treated. See our pricing page for cleaning prices.

What customers say on Google

4.5 out of 5 from 33 Google reviews. Read our reviews.

Page updated